From underneath, remove five underbody cover screws. Remove cover. Pull brake cooling tube off where is attaches to the front bumper. Push the tube to the side so you can get to the light fixture better. The turn signal bulb mounts in the bottom of the fixture. There is a clip on the bulb socket. Squeeze the clip and turn the socket counter clockwise. The wire is long enough to drop the socket out the brake cooler inlet hole in the bumper ... then you can go to the front of the car. Just pull the old bulb straigt out of the socket and push the new one into place. Its a good idea to put a little electrical grease on the contacts before inserting the new bulb. Now test that its working correctly. Go back underneath and put everything back together.
I believe it's located behind the passengers side dash panel.
== ==
== ==
On a 1999 C5 corvette manually put the flip up headlight in the up position, remove the plastic headlight trim around the headlight with three screws... put your bare arm under the raised headlight and remove the turn signal bulb with a careful twist.
== ==
== ==
== ==
pull the steering wheel
== ==
== ==
== ==
The AC power relay is located behind the right side of the dash on a 1991 Chevy Corvette. It is on top of the plenum.