The pump will be a Weldon style pump in the fuel tank. The tank will have to be dropped. The pump and pickup assembly comes out the top of the tank by removing the large circular clip on the top of the tank. This retaining clip is removed by rotating it in a counter clockwise direction. Once the pump assembly is out, it is pretty self explainatory to replace. then reinstallin the pump into the tank, make sure that the float assembly is free and not caught in anything.
buick roadmaster 1992 rear axle does it have limited slip diff
a metal tag is located in the lower drivers side of the windshield
Component Location View. RH Lower Instrument Panel
350
A 1992 Buick does not have an inertia or fuel cut off switch.
5 quarts with a filter
Need to now
On a 1992 Buick Roadmaster, the fuel pump is located inside the fuel tank. To access it, you'll typically need to remove the tank from the vehicle, which involves disconnecting the fuel lines, electrical connectors, and lowering the tank. It's advisable to take safety precautions, such as relieving fuel pressure and disconnecting the battery, before attempting to replace the fuel pump.
No. It's 1.5 din.
On a 1992 Buick Roadmaster, the starter is located on the passenger side of the engine, near the transmission bell housing. It can be accessed from underneath the vehicle, typically requiring the removal of a few components for easier access. Make sure to disconnect the battery before attempting to work on the starter.
its a 350hp vortec engine.
180 hp