Depends on the year, but on mine there are 2 large bolts above each headlight housing on the top sill of the front of the car where the hood closes over them. They look like they would hold the sill to the car, but they hold a large metal headlight assembly. Remove the 2 bolts, the housing will slide forward and then you can remove the bulbs.
It is located in the Fuel Tank which means the Tank will need to be dropped in order to replace the Pump.
its on the same part where you turn them on i went to the junk yard and got the whole thing dash piece and all for $5
That'll be a bulb from inside the engine compartment, behind the lamp.
The starter on a 1984 Chrysler LeBaron with a 2.2L engine is located on the passenger side of the engine, near the transmission bell housing. It is positioned underneath the vehicle, typically requiring access from beneath to remove or replace it. Look for a cylindrical component with electrical connections and mounting bolts.
The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.
Front or rear.. disc or drum type..??????????
be more specific.. replace pads..?? replace hose..?? repair master cylinder..??
you might need to replace the hinge pins.. or the complete hinge
if theyre cracked or broken you need to replace em.. plenty on eBay startin at under a 10er.. if they just dull.. buy a cleanin kit from the local autoshop for under a 5er..
If you just want to change the bulb,you might be able to reach your hand behind the headlight and twist the locking ring counterclockwise and remove the bulb.you may need to unbolt the headlight housing to make room to replace it.
ffs.. it ain't rocket surgery.. follow the instructions on the box
Hi, assuming your Lebaron has the 3.0 engine, the pcv valve is located right behind the valve cover that faces you looking at the engine. It's toward the right side. It's threaded into the block and there will be a black tube coming out of it. Very easy to remove and replace. rtalk7