Each of the headlight assemblies are braced through the radiator support with a pair of retainers. The retainers for the right headlight assembly are in front of the battery. The retainers for the left assembly are in front of the washer fluid reservoir. Remove the retainers by pulling up on the retainer. With the retainers removed, the headlamp assembly falls forward. Reinstall the retainers to the square tabs on the headlamp assembly and the rivet on the radiator support
show location of camshaft position sensor for 2002 Oldsmobile bravada.
I have a 2002 Oldsmobile bravada and we changed the oil today it took about 7-8 quarts.
2002 bravada oldsmobile
In the distributor.
To replace the wheel bearings on a 2002 Oldsmobile Bravada, start by lifting the vehicle and removing the wheel. Next, detach the brake caliper and rotor to access the hub assembly. Remove the hub assembly from the steering knuckle, then press out the old bearings and press in the new ones. Reassemble the components in the reverse order, ensuring everything is tightened to the manufacturer's specifications.
bad spark plug that happin to me to
1999 GMC Jimmy Envoy 2001 Chevy Impala 2001 Ford Escape 2003 Mercury Grand Marquis 2002 Oldsmobile Bravada 1996 Oldsmobile Bravada 2000 Chevy Venture 1994 Kawasaki Vulcan 1500
There is NO cabin air filter on this year..
Replacing the manifold on a 2002 Oldsmobile Bravada typically takes around 6 to 8 hours, depending on the mechanic's experience and the specific conditions of the vehicle. Factors such as rust, accessibility, and the need for additional repairs can also influence the time required. It's advisable to consult a professional for a more accurate estimate based on the specific situation.
The 2002 Oldsmobile computer is located behind the passenger side dashboard. You will need to remove the passenger side kick plate in order to access the computer.
the 4.2L takes 6.6 litters or 7 quarts of oil
You will have to take the bolts off the old headlights and simply replace the old headlight and screw the bolts back in.