I replaced on in an 87 and it should be about the same. It is behind the dash on the passenger side of the car. You need to remove the whole top cover of the dash, all the hush panels and the center console to make sure you have enough room. The heater core looks like a small rotator that is set in a plastic bracket that has two pipes sticking through the fire wall. This is an all day (and sometimes night job) so don't plan on driving the car right away. Hope this helps!
How do i change the ignition switch in a 1988 Chevy camaro
The fuel pump is in the gas tank, you have to take the tank down to replace it.
To replace the heater core in a 1988 Chevy Celebrity, first, disconnect the negative battery terminal and drain the coolant. Remove the dashboard and the center console to access the heater core housing. Disconnect the heater core hoses from the engine compartment, then unscrew and remove the heater core from its housing. Install the new heater core, reassemble the dashboard, and refill the coolant before reconnecting the battery.
A "heater" or a "heater core"?
Yes
Never heard of a Camaro LX...
If you have a 305 or 350, it is 1,8,4,3,6,5,7,2.
Drain the water from your 1988 Chevy cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.
Both automatic and manual 5.0
Take the glove box out. Look in behind. Have fun -- it's not a nice job.
you need to take apart the lower dash on the passenger side. This is not a fun job.
A plugged up fuel filter.