To replace the high mount brake light on a 2007 Chevy Cobalt, first, open the trunk and locate the plastic cover at the rear of the vehicle. Remove the cover by unscrewing or unclipping it, then gently pull it away to access the brake light housing. Disconnect the old bulb by twisting it counterclockwise and replace it with a new bulb, ensuring it is securely in place. Finally, reattach the cover and test the brake light to ensure it functions properly.
How do you replace a break light switch on 1995 Chevy Tahoe
3rd brake light or rear brake lights?
usually the brake light swith is up under the dash right above the brake pedal itself. I have an 09 cobalt and it has a u shaped tab that rides on the side of the brake pedal arm on a small stud that sticks out.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
Check the brake light switch on the brake pedal. Might have to replace it.
you can find the switch on the back of the brake pedal.
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.
about 3 dollars
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
remve the tail light they are on the back side.
7.99 at autozone you have to order it .