0
Most locksmiths can replace and program the ignition. If the key can be turned to the accessory position, then the lock cylinder can be removed by depressing a detent and pulling the cylinder out of the housing. Taking this to a locksmith might be much cheaper than to the dealer.
If the key will not turn, then more aggressive measures must be taken. There are a couple bolts that retain the housing in the dash. The passlock device is held into the housing by the ignition and the three wires will have to be cut. Leave enough room to reconnect using wire connectors. This will not effect the device. The transmission interlock cannot be removed if the lock is in the 'off' position unless the back of the housing is removed. Care must be taken because of the 5 pins, springs, and connector switch can be dropped or lost.
If the key will not turn back to the off position - there might also be an issue with the transmission interlock cable which feeds into the back of the ignition housing. An adjustment may be made to that which will let the key be turned all the way to the off position.
What else can I help you with?
How do you replace the ignition switch on a 2005 Chevy Equinox?
how to replace an ignition switch for 2005 chevy equinox
Change ignition on 2004 Chevy Malibu?
can I switch ignition cylinder with a different ignition cylinder w/key in a 2004 chevy Malibu without having to use a passcode
Where is the ignition switch located in a Chevy Malibu?
The Malibu has been in production on and off for Fifty years, What year are you asking about?
How do you replace ignition switch for a 1994 Chevy Corsica?
Remove the retaining ring at the top of your 1994 Chevy Corsica ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
How Do You Replace Ignition In 1992 Cavalier?
how do you replace ignition switch on a 1992 Chevy cavalier 2.2 4 cylinder
What does the starter relay do in Chevy Malibu?
Starter relay protects the ignition switch from excessive electrical draw.
How do you replace ignition switch on a 1966 Chevy impala ss?
The 1966 Chevy Impala ignition switch can be removed by loosening the retaining ring at the top of the ignition switch. Remove the wiring harness. Reverse the process to install the new ignition switch.
How do you replace the ignition switch on a 2002 Chevy Astro van?
You will need to remove the ignition switch retaining ring in your 2002 Chevy Astro Van. Slide the ignition switch out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install the new ignition switch.
What do I do when my 2000 Chevy Malibu is in park and I can't turn my key to the off position and the key still comes out of the ignition switch?
The neutral safety switch is bad, the ignition does not recognize it is in park. Your ignition switch may be bad.
How do you program a new switch in Chevy Malibu 2001?
1998 chevy malibu programe new switch
How do you get to the ignition switch to replace it on a 1994 Chevy pickup?
Lower the steering column.
Removing the ignition switch on a 2001 Chevy Malibu?
how do u disconnect the cable from the back how do you remove the ignition switch from a 2001 Chevy Malibu you have to put the old key in the ignition. then if you feel around on the bottom of the assembly you will find a small almost rectangular button. depress this and then proceed to turn the ignition clockwise. this will move it to the right position and if everything works correctly it will just slide out.
