when u turn the ignition to run ,look under the key switch thee shoud be a small hole stick a small Allen wrench or something n itll pop out n u can switch ignitions
You drill out the exsisting ignition switch!!
To remove the ignition switch from a 1989 Ford 250 diesel, first disconnect the battery to ensure safety. Next, remove the steering column cover by unscrewing the necessary screws. Once exposed, locate the ignition switch, disconnect the wiring harness, and remove the mounting screws to extract the switch from its housing. Finally, replace it with the new switch and reassemble the steering column cover.
how do i replace the fuel selector switch on the dash of a 1995 ford f250
To remove the ignition switch from a 1974 Ford F-250, first disconnect the negative battery cable to ensure safety. Then, remove the steering column cover by unscrewing the retaining screws. Next, locate the ignition switch, disconnect its wiring harness, and remove the mounting screws to take out the switch. Finally, carefully pull the ignition switch out of the column.
Just replace it, it's not expensive.
Remove the knobs, remove the dash panel, and replace the switch.
It is probably caused by the ignition switch internals shifting (I had a similar problem before) and it turned out to be the ignition switch)
http://au.answers.yahoo.com/question/index?qid=20080127140745AAsrO3M
Replace the switch.
how do you remove the ignition control module on a 1988 ford f-250 pickup?
To replace the ignition coil on a 1995 Ford E-250, first, disconnect the negative battery cable to ensure safety. Remove the ignition coil's electrical connector and the mounting bolts, then take out the old coil. Install the new ignition coil by securing it with the mounting bolts and reconnecting the electrical connector. Finally, reconnect the negative battery cable and start the engine to check for proper operation.
best to go to a experienced mechanic-one who deals with auto keys there are wired involved