take off the bolts at the top of the piston head
Not that difficult but the 350, 5.7Liter has hydraulic lifters and you must be sure the oil hole is lined up with oil hole in block
how do u replace lifters
yes it has hydraulic lifters.
how to replace lifters on a 03 grand am
You have to remove the engine cylinder heads to get to the lifters on the 5.3.
To replace the valve lifters on a Cavalier, remove the intake manifold, valve covers and rocker arms. Remove the heads of the lifters using needle-nose pliers.
is a 1995 s10 2.2 have solid or hydrilic lifters
That would depend on how many valves each cylinder has and the location of the camshaft.
It's not recommended to change just the lifters. The cam and lifters should be replaced together. To get at the lifters, you can remove the rocker covers and intake manifold, loosen the rockers enough to get the pushrods out, then pull out the lifters.
Only if they are worn.
i dont think they do, the lifters are right under the intake manifold
lifters are normally quiet in operation check oil level if fine check oil pressure if ok could be wear on cam and lifters if so replace