I cut out the bad section of the plastic line. Bought rubber tubing at the Auto Parts store to fit the OD of the plastic line and plugged them together. It works fine.
get some1 else to do it
Remove the wiring harness from the back of your Chevy Lumina windshield washer pump. Remove the windshield washer pump fluid hose. Remove the windshield washer pump retaining bolts. Reverse the process to install the new windshield washer pump.
Remove the 2000 Chevrolet Malibu washer tank supply hose. Remove the windshield washer tank retaining bolts. Reverse the process to install the new windshield washer tank.
It is underneath the washer reservoir.
Remove head light, tire, inner liner of fender & than good luck.
Replacing the windshield washer pump on a 1993 Honda Civic is a relatively straightforward DIY task. Here's a step-by-step guide to help you do it: 🔧 Tools & Materials You'll Need: New washer pump (make sure it's compatible with a 1993 Civic) Flathead and Phillips screwdrivers Ratchet and socket set (10mm usually) Pliers Catch pan or rags (for any washer fluid spills) Optional: Jack and jack stands (if you need more room) 🚗 Step-by-Step Instructions: Locate the Washer Pump The washer pump is mounted to the windshield washer reservoir, which is typically located in the front passenger side of the engine bay or in the passenger side fender (behind the wheel well liner in some models). Access the Reservoir If the reservoir is in the fender: Jack up the front passenger side of the car. Remove the front wheel for better access (optional). Remove the inner fender liner (plastic splash guard) using a Phillips screwdriver or 10mm socket to expose the reservoir and pump. Drain the Washer Fluid (Optional) Place a catch pan under the reservoir and unplug the hose from the pump to drain the washer fluid. Or, remove the entire reservoir and dump it. Disconnect the Washer Pump Unplug the electrical connector from the pump. Disconnect the washer fluid hose from the pump. The pump is typically pressed into a rubber grommet in the reservoir. Just pull it out—it may take a little force. Install the New Pump Push the new pump into the grommet (or replace the grommet if it's worn). Reconnect the washer fluid hose. Plug in the electrical connector. Test It Refill the washer reservoir with fluid. Turn the key to ON and activate the washer to make sure the pump works and sprays correctly. Reassemble Reinstall the inner fender liner and wheel (if removed). If you wants to learn more then click "more" Lower the car if jacked up.
You can remove the windshield washer fluid tank from your 2001 Chevy Cavalier by removing the retaining bolts. There will be for retaining bolts at the bottom of the windshield washer fluid tank.
It is located in the washer fluid reservoir.
Remove the wiring harness from your Volvo windshield washer pump. Remove the windshield washer pump fluid hose. Remove the windshield washer pump retaining bolts. Reverse the process to install your new windshield washer pump.
The windshield washer pump is located on the firewall in the engine compartment. Remove the windshield washer pump hose. Remove the wiring harness. Remove the windshield washer pump retaining screws. Reverse the process to install the new windshield washer pump.
its inside the windshield washer fluid tank, you have to remove it to access the pump
On ours, it is behind an access panel in front of the RH tire.