0
There are 2 large 7/16ths screws (both colored black), both on the top of the headlight assembly. Remove both of them, then pull the assembly out towards the front of the car. You might have to pull out on the bottom of the assembly first to remove it. Once the assembly is removed, look at the back of it...The Low beam bulb is the one closest to the yellow signal bulb. The other one, furthest away from the signal bulb is the high beam. Remove the wire clip from the bulb you want to change (you might have to use a small screwdriver to release the plastic catch). Once the wiring is removed, turn the light socket counterclockwise (looking at the back of the assembly) to remove the bulb from the assembly. Just reverse the procedure to put the new bulb into the assembly. When done, put the assembly back in place and replace the two long screws.
What else can I help you with?
Where is the cabin air filter for a 2001 Dodge Intrepid?
The 2001 Dodge Intrepid does not have a cabin air filter.
Will 2002 dodge intrepid wheels fit 2001 Dodge Intrepid?
Yes
Is there an inertia switch on a 2001 Dodge Intrepid?
No. A 2001 Intrepid does not have an inertia switch.
What could cause a 2001 Dodge Intrepid to click when trying to start?
the solenoid on your starter is finished, replace the starter......
Can you replace a 2.7 motor with a 3.5 motor in a 2001 Dodge Intrepid?
Yes, with the computer, harness, and plumbing from the 3.5L
Why leak on thermostat housing 2001 dodge intrepid?
There's a gasket between the thermostat and the block that you need to replace.
What is the 100000 maintenance for 2001 Dodge Intrepid?
Flush and replace the engine coolant. Replace the engine timing belt or chain. Replace the spark plugs & wires.
Where can i find the Egr valve on a 2001 Dodge Intrepid 3.5 liter?
where can I find the egr valve on a 2001 dodge intrepid 3.5 liter
Reset oil change light on 2001 Dodge Intrepid?
A 2001 Intrepid does not have an oil change light.
How do you change the license plate bulb in a 2001 Dodge Intrepid?
It is very easy to change the license plate bulb in a 2001 Dodge Intrepid. You will need to remove the tag and then unscrew the light cover. After the cover is off, unscrew the light and replace with a new one.
Will a 2001 intrepid motor fit inside a 2000 Dodge Intrepid?
Yes.
What does it mean if the blower fan in a 2001 Dodge Intrepid will only work on high speed?
replace the blower motor resistor
