0
# Disconnect the negative battery cable. Wait at least 90 seconds before performing any other work. # Remove the lower engine cover. # Drain the cooling system. # Remove the air cleaner duct. # Remove the lower (No. 2) fan shroud. # Disconnect the upper and lower radiator hoses from the radiator. # Disconnect and plug the automatic transmission lines. # Disconnect the reservoir tank inlet hose. # Detach the cooling fan motor connector and the coolant temperature switch wiring. # Remove the upper radiator supports and radiator. # Remove both lower supports. # Remove the electric fan and bracket, then remove the No. 1 fan shroud. If the radiator is to be serviced or replaced, remove the coolant temperature switch from the radiator. To install: # Install the coolant temperature switch if it was removed. Tighten it to 65 inch lbs. (8 Nm). # Install the No. 1 fan shroud to the radiator. # Install the electric fan and bracket. # Install the two lower supports to the radiator. Install the radiator with the two upper supports and torque the bolts to 9 ft. lbs. (12 Nm).
What else can I help you with?
How many hours to install radiator in 1993 Lexus gs300?
If all goes well you can do this in about 90mins to 2hrs.
How do I repair a Lexus gs300 power window?
Hi, can anyone tell me how to repair an electric window of a 1993 lexus gs300 thank you
How many oxygen sensors on a 1993 Lexus gs300?
2
What are the speaker sizes in a 1993 Lexus gs300?
4 inch in front an d rear doors
How many trunk lifts in 1993 Lexus GS300?
Two and it costs around $125.00 each.
What is the firing order for 1993 Lexus GS300?
The firing order for the 1993 Lexus gs300 is 1, 2, 3, 4, 5, 6. The distributor cap rotates counter-clockwise.
How do you Disable automatic door locks on 1993 GS300 Lexus?
Remove the relay or fuse for the door locks
How do you replace a water pump on a 1993 Lexus Es300?
how do you replace a water pump on a 1993 lexus es300?
Where was the first Lexus GS300 manufactured and what year was that?
The first Lexus GS 300 was manufactured at the Lexus assembly plant in Tahara, Japan. Lexus began production of this model on February 22, 1993.
1993 Lexus gs300 torque specifications?
80-90 ft lbs of torque on the wheels (lug nuts)
How do you change a radiator in a 1993 suburban?
How do you replace a radiator in a 1993 suburban?
When was the Lexus GS300 first released?
Production of the Lexus GS 300 began on February 22, 1993 at the Tahara, Japan assembly plant. They started selling later that year.
