To change brake/tail light you need to remove the two screws in the tailgate jam, by the upper support cable of the tailgate (much easier with tailgate lowered!) and the tail light housing should pop out. The socket for the light is a quarter turn counter clockwise and the bulb is exposed.
To replace the brake light switch on a 1995 GMC Sierra 1500, the steering wheel will have to be dismantled until the brake light switch is reached. The switch is changed by unplugging it and plugging in a new one. There are screws holding the switch in place.
Worn brake pads can cause the brake light to blink on the dash in a 1993 GMC Sierra 1500. This can also be caused by a faulty light.
check with the dealership there was a recall to replace the switch for free! I had mine replaced...tombo
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
How to replace a brake light on a nissan Tiida hatch back.
Im in the same boat as you are but i think you have to disable the airbag and drop the steering wheel to reach it
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
how to replace the brake light switch at the pedal of a 2001 ford zx2
how to replace brake light bulb fiat doblo van
Your brake light is probably brake fluid low or emergency brake on. Rear brake lights are replaced by removing the lens and replacing the dual filament bulb.
Pull the carpeting behind the brake light. Unclip the assembly, replace bulb.
How do you replace the rear brake light bulb on a 2001 Honda civic?"