To replace the rear hatch supports on a 2000 Oldsmobile Bravada, first, ensure the hatch is securely propped open. Use a socket wrench to remove the bolts securing the old supports at both ends. Carefully detach the old supports and install the new ones by aligning them with the mounting brackets and tightening the bolts. Finally, test the hatch operation to ensure it opens and closes smoothly.
To replace the license plate bulbs on a 1998 Oldsmobile Bravada, first, open the rear hatch and locate the license plate light assembly. Use a flat-head screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb by twisting it clockwise until secure. Finally, snap the lens cover back into place and test the lights to ensure they are working.
To remove the dash panel there are two screws directly above the display, take them out. The rest of the panel is held on by clips. The panel should pop right off with the exeption of the conectors for the lights, hatch pop and rear defrost located on the left side of the panel.
Are you asking about the hinged brackets, or the lift struts? EITHER WAY - open the glass hatch and securely prop it up so that it cannot fall. Lifting up the hatch will clearly reveal the hardware that the glass attaches to (or supports it). Remove the appropriate nuts/bolts/screws and replace.
ating: 3.9 - ‎27 reviews Qty(2) BOXI Hatchback Lift Supports for VW Beetle 2012 To 2014 Hatch Supports Struts… ... I anticipated that they would open the rear hatch by fully extending.
How to replace a brake light on a nissan Tiida hatch back.
I have to pull a fuse to get mine to work and then replace it. It only works once, so every time I want in the hatch, I have to open the hood, open the fuse box, remove and then replace the fuse. I can then open the hatch once.
I have a 96 Chevy Blazer S-10 and the latch to open the window in the back hatch will not work. How do I replace the motor?? or whatever to repair?
Make sure you have a friend support the back hatch while you take off the supports. They are bolted on. Do this because the hatch is quite heavy without the lifting arms.
Open hatch and remove strap and handle. Remove rear panel attached to hatch by popping off of hatch. Be careful because the clips are not strong. Use bulb 921 @ 18W.
go to a freaking mechanic.
On a 1989 Acura Integra hatch back the brake lights are reached through the hatch itself. The brake lights housing are on the rear of the vehicle. Unplug the bulbs and replace them.
Open the rear hatch of your van. There are two black button like protrusions behind the hatch next to the turn signal lamp. Pry these out and remove lens. Replace bulb.