To replace the rear window in a 1994 Chevy Silverado you must first remove the old window. This can be done by removing the seal around the window and gently pulling the window out. Apply rubber sealer around the new window opening in the truck. Wrap a rope around the rubber sealer of the new window and position it in the window opening. Carefully remove the rope once the window is resting properly in position. As the rope is removed the rubber sealer should hold the window in position. Reapply the rubber seal if it is available for extra security. Allow the window to set for 10 minutes.
no,it wont.they are different sizes.just order it off of the internet.
what is the bolt pattern for a 1987 Chevy silverado
No.
pop the cover take 4 screws out & put your new 1 in
The starter relay on a 1994 Chevy Silverado is mounted on the starter. The starter and relay are usually changed as a single unit.
NO.
NO it does not.
1994 Chevy fenders fit a 2000 Chevy
I have 1999 chevy Silverado z71 wanting to see if a 1994-95 chevy Silverado z71 bed will fit
4x6 :)
it could but you might need to trim the rear a little
no