0
To replace the serpentine belt on a 2002 Chrysler Sebring, first, ensure the engine is off and cool. Locate the tensioner pulley and use a wrench or ratchet to rotate it counterclockwise, which will relieve tension on the belt. Remove the old belt and route the new belt according to the belt routing diagram usually found on a sticker under the hood. Finally, reapply tension by releasing the tensioner and double-check that the belt is properly seated on all pulleys.
What else can I help you with?
How to replace push rods on a 2002 Chrysler sebring gtc?
A 2002 Chrysler Sebring has an overhead cam engine. That means it does not have push rods.
Where is the cabin filter on a 2002 Chrysler Sebring?
A 2002 Chrysler Sebring was not built with a cabin filter.
Where is the maf sensor on a 2002 Chrysler Sebring convertible?
A 2002 Chrysler Sebring convertible does not have a maf sensor.
Is there a 2002 Chrysler cirrus?
No, in 2002 the Chrysler sedan was a Sebring.
How much does it Cost to replace a starter on a 2002 Chrysler Sebring?
Depends on where you get it done but was $365 for me. Yuck!
Can you replace a 2.7L engine in a 2002 Chrysler Sebring convertible with a 3.0L from a same year Chrysler Sebring coupe?
It is not a direct swap. They use different transmissions, computers, wiring, etc.
Where is the MAF Sensor located on a 2002 Chrysler sebring sedan lx?
A 2002 Chrysler Sebring sedan does not have a MAF sensor.
Ignition switch will not turn Replace?
Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?
What engine will have the same wiring harness and motor mounts as the 2.7L out of a 2002 Chrysler Sebring?
The 2.7L out of a Chrysler Sebring or Dodge Stratus.The 2.7L out of a Chrysler Sebring or Dodge Stratus.
Does a 2002 Chrysler sebring have a vacuum modulator?
No.
Does a 2002 Chrysler Sebring have a cabin filter?
No
Where is the obd connector on a 2002 Chrysler sebring?
The 2002 Chrysler Sebring OBD 2 port is underneath instrument panel, near steering column
