0
just had to replace mine and had to undo the motor mount. be sure to jack motor with a wood block on jack unde the oil pan. just enough pressure on jack to hold up motor. take out the motor mount bolts and drop motor just enough to get belt between the mount and the support where the bolts go through.
What else can I help you with?
How do i replace the belt tensioner on a olds alero 2000 v-6?
To replace the belt tensioner on a 2000 Oldsmobile Alero with a V6 engine, first disconnect the negative battery terminal. Use a wrench or socket to relieve tension on the serpentine belt by rotating the tensioner pulley, then remove the belt from the tensioner. Unscrew the mounting bolts securing the tensioner, and remove it from the engine. Install the new tensioner by reversing the process, ensuring the serpentine belt is properly routed before reconnecting the battery.
How do you replace the drive belt in a 2001 Oldsmobile Alero?
If you are referring to the serpentine belt, you have to dislocate the engine from its mount on the right side and slip the new belt under the mount and onto the path designated by the decal near the front of the engine on the right side.
How do you change a serpentine belt in an 02 Olds Alero with a 4-cylinder stick?
In order to change the serpentine belt for a 2002 Oldsmobile Alero, you must obtain a copy of the serpentine belt routing diagram from the manufacturer. Follow the routing diagram. Use a serpentine belt tool for loosening the tensioner. In order to position the belt, use a belt placement tool.
Replace serpentine belt on Chevy Avalanche?
Replace serpentine belt on Chevy avalanche?HOW
How do you replace the serpentine belt in 1997 grand am?
How do you replace the serpentine belt in 1997 sunfire
How do you replace the serpentine belt on a 99 oldmobile alero?
It has been a while but from what I remember you need to put a floor jack under the motor and pull the bolts from the upper engine mount. Lift the engine enough to slip the new belt passed the mount and install on the pulleys. Fricken engineers!!
Where is the alternator located on a 1999 Oldsmobile Alero 4 cylinder?
On a 1999 Oldsmobile Alero with a 4-cylinder engine, the alternator is located on the front side of the engine, near the top, slightly towards the driver's side. It is mounted on the engine block and can be accessed from the top of the engine compartment. You may need to remove the serpentine belt to replace or service the alternator.
How do you put a serpentine belt fan on a 1995 Buick Riviera?
get someone that knows what they are doing, to replace it the 2 long front engine mount bolts need to be removed to replace serpentine belt
How do you replace serpentine belt on 1994 ford escort 1.9 l engine?
muchplay the altenator belt should have
Engine squealing after warming up?
sounds like you need to replace the serpentine belt
Replace the serpentine belt on a 2003 Dodge Dakota?
The serpentine belt on a 2003 Dodge Dakota is replaced by loosening the belt tensioner and slipping the belt off. It can then be removed from the engine accessories and a new belt installed.
How do you replace serpentine belt on 2008 Malibu 3.5?
To replace the serpentine belt on a 2008 Malibu with a 3.5L engine, first, ensure the engine is off and cool. Locate the serpentine belt routing diagram, often found on the radiator support or inside the engine compartment. Using a wrench or ratchet, release tension from the serpentine belt tensioner to remove the old belt. Install the new belt following the routing diagram, ensuring it is properly seated on all pulleys, and then release the tensioner to apply tension to the new belt.
