How do you replace the starter in a 1994 Grand Prix SE?

Answer 1

first disconnect the battery then raise the front end up so ya can get under it.remove the splash guard off the front and the starter splash guard.once that's done, remove the wires on the starter.then go in from the top and remove the coil pack .try not to unplug the wires unless you can remember what wire went where.carefully twist and turn up on its back and push the nose out first.CAUTION make sure any wires you disconnect you reconnect back to the right plug .take the old one out ,then reverse the procedure to install the new starter.the whole time from start to finish with no interuptions is about 2-3 hrs.make sure you scotch the tires,and use all safety procedures ie:safety glasses,wheel chocks,jack stands, and the right size tools.