You can buy the belt at any auto surplus store for around $20 or less. Look at the dimensions under the hood to see what you are doing. Locate a long screw you can get to under the hood. (Need assistance) have somebody else tap the screw from under the car to loosen the pulley. Switch belts and screw back into place and you are set!
It must be replaced every 105,000 miles.
It has a timing belt. Replace at 100,000 miles.It has a timing belt. Replace at 100,000 miles.
Timing Belt Cover.
No, this engine has a timing belt.
Replace the timing belt at least every 100,000 miles.
Replace the timing belt every 100,000 miles.
To replace the timing belt on a 1996 Chrysler Concorde, first disconnect the negative battery cable and remove any necessary components, such as the engine covers and accessory belts. Align the timing marks on the crankshaft and camshaft to ensure proper placement, then remove the old timing belt. Install the new timing belt, making sure it is taut and aligned with the timing marks, and then reassemble all components in reverse order. Finally, reconnect the battery and start the engine to ensure everything is functioning correctly.
Replace the timing belt every 100,000 miles.
Not one penny. The 1996 Jeep Cherokee does not have a timing belt. It has a timing chain.
The 3.3L engine has a timing chain....not a timing belt.... The 3.0L engine has a timing belt......
Replace the timing belt every 100,000 miles.
The cost to replace a timing belt on a Chrysler Sebring can vary depending on the area you are in and if you do the job yourself or take it to a shop. You will have the cost of the belt and labor costs for the job if you take it to a shop.