First you take the air induction vent off from over the radiator shroud. It just pops off from the shroud. Next you look down beside the radiator and you will see bolts that you have to take loose. The radiator shroud is a 2 piece shroud. Once you get the top shroud out you can take the idler pulley loose and take the serpentine belt loose and take the fan blade off. You will be surprised with the room in there once you get that out of the way. I changed mine in about an hour. While you have all that out checked your idler pulley tension because after i replaced the water pump the idler pulley went bad and i had to replaced the serpentine belt again.
Remove the cylinder had from your 1997 Chevy Astro engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
fireing order for 1997 astro van v6
what is wrong when your gages on dash board stop working on your 1997 chevy astro van?
remove the inner pannel. That will put you at the assembly. with windo up, remove assemblt. then replace
if you have a leaking water pump gasket i thing bay a new one is better
Is anyone on line to help me with this question? Where is the fast idle thermal valve in a 1997 Chevy astro van located?
yopu have to have a special tool to do it .
Astro 4WD Base: 29.370$ Astro 4WD LS: 31.895$ Astro 4WD LT: 34.600$
you have to replace the whole motor assy. you can buy after market from places like napa.
how to replace a heater core in a 1997 Chevy blazer
I haVE A 1999 CHEVY astro and it holds just over 25 gallons. once ran out of gas and then had it filled.
in the fuel tank