On a 2002 Ford Excursion : The clock spring would be inside the steering wheel column cover * it allows you to turn the steering wheel without breaking the electrical connections to the cruise control buttons , horn , etcetera
According to the 2002 Ford Excursion Owner Guide : ( 166.6 litres / 44.0 U.S. gallons )
To change the turn signal switch on a 2002 Ford Excursion, first disconnect the battery to ensure safety. Remove the steering wheel by taking off the retaining nut and using a steering wheel puller if necessary. Then, detach the column covers and locate the turn signal switch, which is typically mounted on the steering column; unplug the old switch and replace it with the new one. Reassemble the column, reattach the steering wheel, and reconnect the battery to complete the installation.
No
The 2002 Ford Excursion OBD 2 port is under drive side dash above accelerator
You may want to try and spray some wd40 on the wheel hub. after doing this may help it to turn by hand. That is what I did and it worked.
how do you replace q front wheel hub on a 2006 ford 250 5.4 v 8 4 wheel drive
According to the 2002 Excursion Owner's Guide, it should be a 20A fuse in fuse location #18.
8 x 170mm
Motorcraft FL-1995
According to the 2002 Ford Excursion owners manual : Motorcraft MERCON automatic transmission fluid is used as the power steering fluid
My Ford Excursion is equipped with a V10 and has 4 wheel drive and gets exactly 7 miles to the gallon in the city.