To replace the thermostat on a 2007 Chrysler Pacifica, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant and remove the upper radiator hose from the thermostat housing. Unscrew the thermostat housing, remove the old thermostat, and clean the mating surfaces. Install the new thermostat, reattach the housing and hose, refill the coolant, and reconnect the battery.
To replace the thermostat on a 2007 Chrysler Pacifica, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose to access the thermostat housing. Unscrew the housing and take out the old thermostat, replacing it with the new one, ensuring the gasket is properly seated. Finally, reassemble everything, refill the coolant, and reconnect the battery cable.
A 2007 Chrysler Pacifica fuel tank holds approximately twenty gallons.
In a 2007 Chrysler Pacifica, the thermostat is located in the engine compartment, specifically on the engine side of the lower radiator hose. To access it, you typically need to remove the engine cover and possibly the intake manifold, as it is positioned near the water pump. It’s advisable to consult a repair manual for detailed instructions if you plan to service it.
Chrysler does not have reset buttons.
Under The Hood!
Yes.
Yes
A ( 2004 to 2006 ) Chrysler Pacifica 3.5 litre V6 engine has a timing BELT A ( 2006 to 2008 ) Chrysler Pacifica 3.8 litre V6 engine has a timing CHAIN A ( 2007 and 2008 ) Chrysler Pacifica 4.0 litre V6 has a timing BELT
Only one spare was offered by Chrysler.
6 quarts
Engine, yes. Transmission, no.
Man, don't listen to the previous user's answer, Pacifica's are still produced, I own a 08 Pacifica touring package with the 4.0 v6 and I actually saw a add for the 2019 model , Pacifica's remained crossover SUV's until around 2010 or 2011 I think.