If it is the same as my 2000 Navigator, you have to remove the inside panel of the tail gate, which is held on with hidden clips on the inside of the panel, a $10 tool at most automotive stores will assist in removing the panel. You must also remove the strap that is held on with 2 Philips screws. (it would have been easier for us if Lincoln had installed an access panel).
how do you change the light on the gear shift of a 2003 Lincoln navigator
On a 2003 Lincoln Navigator : The check engine light / service engine soon light is a drawing of an engine located directly under the center of the tachometer
Mini fuse ( # 17 ) is a 15 amp fuse for the foglights in a 2003 Lincoln Navigator
It is a hard quinton
can be oil pressure change the oil filter
To repair the shifter console light on a 2003 Lincoln Navigator, first, check the fuse associated with the console lights and replace it if necessary. If the fuse is intact, remove the center console cover to access the gear selector assembly. Inspect the bulb or LED behind the gear selector for any damage and replace it if needed. Reassemble the console and test the lights to ensure they illuminate correctly.
Remove license plate, dissconnect backup light wire, remove bolts to backup light, pull backup light sideways, reach hand to tail light, twist socket.
my battery is still on after changing battery and altnator
advance auto or OB II code reader
Behind the bumper and fog light on the driver's side
altinater is probobly dead
To change the backup light bulb on a 2001 Lincoln LS, first, open the trunk and locate the tail light assembly. Remove the screws or clips securing the tail light lens, then gently pull the assembly out. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble the tail light by reversing the steps. Finally, test the new bulb to ensure it’s functioning properly.