Disconnect the battery for a few minutes
After reading the code, and repairing the codes, you reset code with a scan tool.
To reset the service engine light on a 1997 Dodge Caravan, you can disconnect the negative battery cable and leave it off for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-II scanner to erase the codes directly if you have access to one. After resetting, ensure to address any underlying issues to prevent the light from coming back on.
This happens when there is an Active Misfire, or a urgent pending service matter. Get your codes checked.
On a 1997 Ford Taurus : The transaxle ( transmission for a front wheel drive vehicle ) is located in the engine compartment bolted to the engine
To reset the "Service Engine Soon" light on a 1997 Chevrolet Tahoe, you can disconnect the negative battery terminal for about 10-15 minutes. This clears the engine codes stored in the computer. Alternatively, you can use an OBD-II scanner to erase the codes if you have access to one. Remember that if the underlying issue isn't addressed, the light will likely come back on.
On a 1997 Ford Taurus the thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
Try disconnecting the battery for about 10 mins. Have vehicle scanned to determine the problem and have codes cleared
check obd2 with scanner for trouble codes find problem, fix or replace sensor or part, clear codes with scan tool
If you have the codes read and repair what is wrong with the vehicle the light will go out on its own, or can be reset by the tech.
Try disconnecting battery for about 10 mins. or have vehicle scanned to determine problem or clear codes
In a 1997 Ford Taurus : The 3.0 liter " Vulcan " V6 engine has ( 1 timing CHAIN )
There are ( 2 ) exhaust manifolds on your 1997 Ford Taurus V6 engine