To check for Diagnostic Trouble Codes stored in the computer, turn the ignition on, then hold down the OFF and WARMER (for digital dash) or OFF and passenger-WARMER buttons (for analog dash) or OFF and "Info ^" buttons (if you have temperature dials) until all of the dash lights come on. The digital display will then show any codes stored. Be prepared to write them down. When it's done, you will probably see "PCM?" at this point use the fan speed up button to select pcm now it should say "PCM CODES" press the fan speed down button to scroll down to "CLEAR PCM CODES" press the fan speed up button and it should say "PCM CODES CLEAR" now turn off the ignition and your good to go.
service engine soon 1992 eldorado
The engine is overheating.
Yea my cadillac light check engine whay
The check engine light on a 1999 Cadillac DeVille can be reset by disconnecting the battery for 30 seconds. The light will immediately come back on if the problem still exists.
Reading the codes requires a scan tool.
You have to reset it with a OBC scanner :-)
Disconnect the battery for 30 seconds
The check engine light would illuminate.
faulty dash unit
Have the problem that caused the check engine light to come on repaired. They will reset the light with an OBD2 scan tool. The light will just come back on if the problem is not repaired.
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
battery disconnect for 3 min