Just disconnect a battery cable for a couple of minutes.
There is no error code PO329 for a Nissan Altima. The closest codes for this would be P0335 which is the CKP Sensor or P0340 which is the CMP Sensor, Detectable Or Undetectable Circuit.
I JUST WANTED TO KNOW HOW CAN I FIXED MY ERROR CODE ON KNOWCK SENSOR
To clear codes on a Nissan forklift, first ensure the forklift is turned off. Then, turn the ignition key to the "ON" position without starting the engine. Press and hold the "Mode" and "Reset" buttons on the instrument panel until the error codes disappear. Finally, turn the ignition off and then back on to verify that the codes have been cleared.
This website has all of the OBD codes. http://autorepair.about.com/cs/troubleshooting/l/bl_obd_4.htm
you get a code reader and hook it up to the fuse boc and it will say erase codes and u mass the green button.
Go to www.banzai-racing.com , it will tell you how to get the error codes and what they are.
55 code is not an error code, it signals end of codes. If no other codes preceded it, you have no error codes.
What does the error code U1000 mean on a 2004 Nissan murano
If your newer Nissan still uses the same codes as my 96 a P1110 is a cam positioner sensor malfunction. The problem could also be elsewhere in the cam positioning electronics. Dean
Visit Gamefaqs.com and go to the cheats/codes section for MMBN3. You'll get error codes, numberman codes, ex codes, SHRINK codes (those are helpful) and more.
Error codes are codes that tell when a computer or car is having problems and a rough idea as to what the are. Beyond that, we will need a more specific question.
You need to check your engine. The computer has detected a problem with the engine management system and the light is letting you know that is has error codes stored.