After the cause of the code is repaired, the light is reset with a scan tool.
After the cause of the code is repaired, the light is reset with a scan tool.
Probably the speed wheel sensor needs to be reset
There is a failure in the ESP (electronic skip protection) system.
To reset the ESP (Electronic Stability Program) light on a C240, first ensure that the issue triggering the light is resolved, as it often indicates a fault in the system. You can then try disconnecting the car battery for about 10-15 minutes to reset the system. After reconnecting, start the vehicle to check if the light has turned off. If the light remains on, it may require a diagnostic scan to identify any persistent issues.
the esp is allways on u can turn it off by pressing the button esp if theres no button its in the cluster setting check the manual on how to reset the service light its in the same menu
Mobil 1 esp 5w30
The ESP (Electronic Stability Program) light in a sprinter vehicle may illuminate after 30 miles due to a variety of reasons, such as a malfunction in the traction control system or a related sensor issue. It could also indicate that the system has detected a fault that needs attention, like wheel slip or a problem with the ABS (Anti-lock Braking System). Regular maintenance or diagnostics may be necessary to pinpoint the exact cause and ensure safe operation. If the light persists, it's advisable to consult a professional mechanic.
To reset the Electronic Stability Program (ESP) on a Subaru Outback, start by turning off the ignition and then turning it back on without starting the engine. Next, press the brake pedal and hold it while you turn the steering wheel fully from lock to lock. After doing this, release the brake pedal and turn off the ignition again. Finally, start the engine to check if the ESP warning light has turned off, indicating a successful reset. If the light remains on, it may indicate a more serious issue that requires professional diagnosis.
To reset the ESP (Electronic Stability Program) light in a Volvo C70, first, ensure that the issue causing the light to illuminate is resolved, such as checking tire pressure or fixing any faults. Next, turn off the ignition, wait for a few moments, and then restart the vehicle. In some cases, you might need to use an OBD-II scanner to clear any error codes that are triggering the light. If the light persists, consider consulting a professional mechanic for further diagnosis.
It should tell you in the handbook. For the SLK it is turn the steering from lock to lock whilst the engine is running. May be the same for other Mercedes.
Why is my 97 mercedes e420 abs and esp warning light on?
The system resets every time you shut the key off. the lamp stays on til the fault is repaired
In most cases it means one of the wheel speed sensors has gone bad and needs to be replaced.