0
On any GM vehicle, turn the key to the accessory position (TWO CLICKS FORWARD), then press the gas pedal to the floor three times in a row. Then start the vehicle. The light should go away or on newer models the oil% should reset to 100%. If It does not work then change your pace of pressing on the gas pedal. It generaly needs to be done in about 2-3 seconds.
------------------------------------OR--------------------------------------------------------
You could do it the easy way. Be sure the engine is off, and turn the key two clicks forward to the run position. Then press and hold both the INFO button and the ARROW on the steering wheel together for about 3 seconds and then release, your display in your speedometer should change, press the INFO button repeatedly until you see "RESET OIL LIFE" and then press the ARROW button, then it'll say ACKNOWLEDGED and your good to go....
What else can I help you with?
How u turn off Oil change light on Chevrolet Cobalt?
Turn the key to the on position but do not start. Press gas pedal to the floor and release 3 times. It will now reset.
Where is the fuel pump reset switch on a 2005 Chevy Cobalt?
Chevrolet does not use inertia/reset switches.
How do you reset the check engine light on a 2005 Chevrolet Cobalt?
Unplug the posative terminal in your trunk by your spare tire, then push the gas about 3-5 time and plug the battery back in. voila!
How do you reset the engine check light for a 2008 Chevy Cobalt?
Fix the cause of the light coming on and the light will reset itself within a few drive cycles.
How do you reset the traction control light on your 2008 Chevy Cobalt?
Scan tool
How do you reset brake maintenance light for a Chevy Malibu?
The instructions on how to reset the brake maintenance light in a Chevrolet Malibu can be found in the owner manual. It can be viewed for free at Chevrolet's official website.
How do you reset the check engine light on 2008 Chevrolet impalas?
After repair, you reset with a scan tool.
How do you reset change oil in 2011 silverado?
To reset the oil change light in a 2011 Chevrolet Silverado, turn the ignition to the "On" position without starting the engine. Press the accelerator pedal fully three times within five seconds. After doing this, the oil change light should reset. Turn the ignition off and then start the engine to ensure the light is no longer illuminated.
How do you reset the abs light on a 1999 Chevrolet Malibu?
Carefully!!! You will need to pressure bleed the system and it will require a scanner to reset the light.
How do you turn off oil change light in a 2006 Chevrolet Colorado?
Turn ignition to auxillary pump gas pedal three times turn ignition off then back on light should be reset. also if you call jiffy lube and tell them they did not reset light they will give you process to reset.
How do you reset the oil change light on a silhouette?
To reset the oil change light on a Chevrolet or Pontiac Silhouette, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within five seconds. Once completed, turn the ignition off and then start the vehicle to ensure the light has been reset. If the light remains on, repeat the process.
Can you unhook service engine light on Chevrolet 1500?
Why? Just reset it.
