start explorer press setup when it comes to engine check push RESET it says new oil push and hold reset it busses and it is reset until next oil change
asy
It may have not been reset properly.
asy
To reset the oil change light on a 2013 Ford Explorer, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, turn off the ignition, then start the engine to ensure the oil change light has been reset.
rest change oil indicator on the dash after you have changed the oil
To reset the oil change required message on a 2006 Ford Explorer, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. The message should disappear, indicating that the oil change reminder has been reset. Finally, turn off the ignition and then start the engine to confirm the reset.
After the Explorer is scanned for trouble codes to diagnose and then repair the malfunction , then the check engine light can be reset
If an Explorer engine oil change soon light stays on, the sensor needs replaced. The sensor may also need reset by holding the button down for five seconds.
hold the buton on the cluster then turn the key to ignition
Depends on the make, model, and year vehicle you failed to list.
How do u put the spring back in for the Change cubby
On most cars, including Ford Explorer's, once you fill the tire up with air, should reset itself. If the light does not reset on its own, check your manual for the proper procedure.