1. Turn the ignition to the "on" position
2. Wait three seconds, then press the gas pedal (very hard) 5 times within 5 seconds
3. Release your foot from the gas peddle for 7 seconds
4. Push the gas pedal down for 10 seconds (SES Light should start to blink)
5. Release the gas pedal for 10 seconds
6. Push the gas pedal again holding it down for 10 more seconds
7. Release the gas pedal and turn the ignition to "off"
8. Start the car, your ECU should now be reset.
= How do you reset the Airbag light on a 2001 Nissan Maxima SE ? =
reset service engine light
How do you reset service light in 2003honda pilot
How do I reset the service engine light on a 2003 Chevy Trailblazer?
How do you reset the oil service warning light manually on a 2003 BMW 525i?
reset service engine light on BMW 325
You need a scan tool to reset light after repairing the code.
One option to reset is to disconnect the positive (+) battery cale on the battery for 3 minutes. Then reconnect it , this will reboot the computer and the light. SORRY: It doesnt work on the Nissan 2003 350z to do this.
How do you reset the security system on a 2003 nissan xterra?
Take it to your dealer!
To reset the service light on a 2003 BMW Z4, turn the ignition key to the "on" position (without starting the engine). Press the gas pedal fully three times within 10 seconds. Then, turn the ignition off and back on to check if the service light has reset. If successfully reset, the light should no longer be illuminated.
To reset the service light on a 2003 Renault Megane, turn on the ignition without starting the engine. Press and hold the trip reset button on the dashboard until the service light begins to flash, then release the button. After a few seconds, the light should turn off. If it doesn't, repeat the process to ensure the reset was successful.