turn switch to on position (all the dash lights on but engine off) wait for all lights to go out then press accelerator pedal three times
how do you reset change the oil light in a 2004 alero?
turn off engine, and start again
Have vehicle scanned to determine the problem
Just press the reset button at the fuse panel on the driver side. Press it for some seconds and it will clear the light.
get a code scanner, or borrow one from a parts store, plug it in and clear codes
Turn the ignition key on for 10 minutes and it will reset.
GM vehicles do not use inertia/reset buttons
Open up the drivers side door and you will see a cover pannel on the dash side. Pull the open and press the reset light until the light flashes. You must have the car ON.
There isn't one. Ford is mainly the only ones who have a reset switch.
After changing the engine oil, you must reset the system. To reset the system, you must do the following: 1. With the ignition key to ON, push the RESET button located in the driver's side instrument panel fuse block. 2. When the CHANGE OIL light starts to flash, press and hold the RESET button again. The reset is complete when you hear the chimes sound and the CHANGE OIL light goes out. I can e-mail you the manual for the Alero 2001 for 14.95 us forward your payment to paypal send to : ray_rayon@hotmail.com use paypal If you want the Alero use manual on CD then 29.95us
I have a 2002 alero how do you reset, the coolant light is always on. Thanks, Alero owner
My tire pressure light has been on forever. I finally got it to go off by holding in the reset button til it blinked and then shut off. You can try that.. if not it's just gonna stay on.