0
To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 180 days] perform the following:
1. Tap on the ODO/TRIP button to toggle the display between the odometer and trip odometer.
2. Tap on the ODO/TRIP button again to toggle the display between the trip odometer and OIL LIFE XX% display.
3. Press and hold the ODO/TRIP button for ten seconds or more to display OIL LIFE 100%. Your oil life is now reset.
4. Tap on the ODO/TRIP button to return the display to odometer.
What else can I help you with?
Where is the reset button for computer after oil change on a 2005 ford escape?
On a 2005 Ford Escape, the reset button for the oil change light is typically located on the dashboard. To reset it, turn the ignition to the "on" position without starting the engine, then press the gas pedal three times within five seconds. This should reset the oil change light. If your model has a different setup, consult the owner's manual for specific instructions.
How do you reset oil light after oil change in 2011 FORD E350?
It is very easy to reset the oil light after you had an oil change in your 2011 Ford E350. You will just need to disconnect the battery for up to 1 minute to reset the light.
How do you reset 2005 ford escape check engine light?
Have vehicle scanned
How do you reset the change oil light on a 2011 ford Explorer?
asy
How do you reset oil change light on a 2007 Ford Taurus?
o I want to reset the oil light on my 2007 mustang 6cyl.
How do you reset oil change light on 2007 ford expedition?
On mine, you press SETUP twice and then press and hold RESET
How do you reset the oil change light on a 2013 Ford Explorer?
To reset the oil change light on a 2013 Ford Explorer, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, turn off the ignition, then start the engine to ensure the oil change light has been reset.
How do you reset the oil change light on a Ford f150?
To reset the oil change light on a Ford f150 you start by pressing the button on the dashboard. After you press the button on dashboard, it will start to cycle through liquid level checks, such as fuel level. When it gets to the oil, press and hold the reset button.
How do you reset the airbag light on a 1994 ford escort?
how do reset the airbag light on a 94 ford escort
How do you reset your change oil light in your 2013 Ford Explorer?
rest change oil indicator on the dash after you have changed the oil
How do you manually reset the service engine soon light on a 2005 Ford Explorer?
To manually reset the "Service Engine Soon" light on a 2005 Ford Explorer, you can disconnect the battery by removing the negative terminal for about 15 minutes. This will reset the vehicle's computer and clear the light. Alternatively, you can use an OBD-II scanner to erase the trouble codes that triggered the light. Always ensure that any underlying issues are addressed before resetting the light.
How do you reset the service engine soon light on a 2005 Ford Focus?
My experience has been that if you disconnect the battery cables and leave them off for a minute, then reconnect them, the service engine light should have reset.
