1. Turn the ignition switch to the ON position. Do not
start the engine.
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.
---
Good luck on resetting the change oil light.
The check engine light does not come on for an oil change.
Turn the ignition on, with the engine off. Press the gas pedal to the floor three times in ten seconds.
To reset the oil change light on a 2009 Ford E350, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you turn the ignition back on, the oil change light should be reset. If it doesn't turn off, repeat the process.
To reset the filter change light on a 2009 Nissan Altima, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. This should reset the filter change light. If it doesn't reset, you may need to repeat the process or check for any underlying issues.
how to reset engine check light on 2009 murano
Change your oil. The light can be reset with a code reader by any mech & is usually done at time of service. On some cars, disconnecting batt. long enough will reset them, although sometimes come back on.
How do you reset check engine light for the 2009 Chevy trail blazer?
how do you reset the low tire pressure warning light on a 2009 camry
Turn ignition on with engine off. Press gas pedal to the floor three times in 5 seconds. Cycle key and light should be reset.
You will have to locate the Info button to reset your computer on a 2009 Sprinter after an oil change.
The oil pressure low light can not be reset. The failure must be repaired. The oil change due light is reset like this. Turn key on, engine off. Press gas pedal to the floor three times. Cycle key. Light should now be off.
hi how do i reset tire pressure sensor light on