0
THIS WORKS!!!!!! It will work for all cars. Disconnect the both cables from the battery terminals. Hold the two cables together--in contact--for 10-15 seconds. MAKE SURE you do not touch the battery terminals with the cables while you are touching them to each other. [The first part of the next sentence makes no sense whatsoever.]This will drain the remaining battery in the cables themselves and it clears the computer. Simply reconnect and wah-lah. fixed. [I think the writer means that holding the two battery-cables in contact will drain the remaining "juice" in the cables, but that does not seem to me to be a correct description of what results from holding the two cables in contact with each other for 10-15 seconds.]
[touching the cables together will short the cars entire electrical circuit, clearing any charge held in the computer systems. Some cars may require the key to be in the accessory position. DO NOT DO CROSS THE CABLES IF THE CAR IS RUNNING. Also, do not do this if your car has a second battery (this is found on some security systems and some European cars). Cars with such systems usually have a jumper that, when shorted, will reset the computer. If you are unsure if you car has such a system, please check your manual or take the car to a mechanic. NOTE: some cars may require a code to be entered into the stereo unit after disconnecting the battery. This is true on SAABs and BMWs, among others.]
AnswerCheck out the O2 sensors.might be bad, or not connected [off topic - this is a common problem but please answer the question]
What else can I help you with?
Reset check engine light on a Hyundai elantra?
The check engine light, on your Hyundai Elantra can be reset by removing the fuse. Keep the fuse out for 10 seconds and replace it to its slot.
How do you reset the check engine light on a Hyundai?
you disconnect the battery for a couple minutes.
How do you reset check engine light on 2004 Hyundai Getz?
P 0172
How do reset fuel check engine light on a 2004 Hyundai sonata?
It appears that if you disconnect the battery for 5 seconds you get your reset.
How do you reset check engine light on a 2003 Hyundai accent?
disconnect the battery for about 30 sec then reconnect it
Reset check engine 1993 Hyundai excel?
To reset the check engine light on a 1993 Hyundai Excel, first, disconnect the negative terminal of the battery and leave it disconnected for about 10-15 minutes. This will reset the vehicle’s computer system and clear the check engine light. After reconnecting the battery, start the car to see if the light has turned off. However, if the light persists, it may indicate an ongoing issue that needs to be diagnosed.
How do you reset the check engine warning light on a 2002 Hyundai Santa Fe?
To reset the check engine light on a 2002 Hyundai Santa Fe, you can disconnect the car's battery for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-II scanner to clear the codes directly. However, it's important to ensure that any underlying issues that triggered the light are addressed before resetting it.
How do you reset oil light on 2014 Hyundai sonata?
To reset the oil light on a 2014 Hyundai Sonata, first turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. After that, turn off the ignition and restart the engine to check if the oil light has reset. If the light remains on, you may need to repeat the process or check for any underlying issues.
How do you reset the check engine light for a 2000 Hyundai tiburon?
Take your car to an AutoZone and ask them to pull your codes. They offer this for free, and it will reset your engine light, and you'll get to know why the light was on. Until you actually fix the problem though, the light will just come back on.
How do you reset the check engine light on a 2008 Chrysler Sebring?
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
How do you reset the check engine light on a 1999 volkswagen jetta?
The check engine light has to be reset with a OBD scan tool
How do you reset the check engine light on 2007 dodge with cummins engine?
You reset the check engine light with a scan tool after repairing the failure.
