answersLogoWhite

0

Push the reset button just to the right of the trip odometer

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you reset the trip meter on a 2001 jeep?

Press and hold the trip reset button while you are on the trip meter.


How do you reset your speedometer on your 1999 Honda Civic EX Sedan?

You cannot reset a speedometer. You can reset the trip meter but not the odometer. Reset the trip meter by pushing and holding the trip button.


How do you reset trip meter?

There is usually a reset button.


How do you reset the oil light on a Honda?

On my 2003 accord, I had to hold down the trip meter reset and then turn the key to the on position while still holding down the reset and hold for 7 seconds.


How do you reset trip meter for suzuki xl-7?

What year is the vehicle? On my 2006, there is a button beside the little window at the bottom of the speedometer. Short presses cycles between odometer, trip meter 1 and trip meter 2. While displaying the trip meter, press and hold the button for about 2 seconds. The trip meter will reset to zero.


How do reset speedometer trip meter on a Saab 93 tid?

To reset the trip meter on a Saab 93 TID, locate the trip meter button on the dashboard, usually found near the speedometer. Press and hold this button until the trip distance resets to zero. Ensure the ignition is in the "on" position, but the engine doesn't need to be running. Release the button, and the trip meter should now be reset.


How do you reset trip meter on 2005 Buick lacrosse?

To reset the trip meter on a 2005 Buick LaCrosse, locate the trip odometer button on the instrument panel. Press and hold the button until the trip meter resets to zero. If your model has a digital display, you may need to toggle through the options using the button until you reach the trip meter before resetting. Release the button to confirm the reset.


Can you reset a trip meter on a motorcycle?

Yes, you can reset a trip meter on a motorcycle. Most motorcycles have a button or a combination of buttons on the dashboard or near the instrument cluster that allows you to reset the trip meter. Typically, you would press and hold the button for a few seconds until the trip meter resets to zero. Always refer to your motorcycle's owner manual for specific instructions, as the process may vary by model.


How do you reset the mileage counter on new Ford Fiesta?

Hi, to change it between the total miles and the trip meter you need to hold down the tube-like switch.....and to reset the trip meter you press it once (when you're looking at the trip meter - not the total miles)


How do you reset odometer on 2011 dodge ram?

You can not reset the odometer. The trip meter can be reset by holding down the button.


Where is the button to reset the 'trip' meter on a BMW 1series coupe?

To reset the 'trip' meter on a BMW 1 Series Coupe, locate the trip computer button on the turn signal stalk or the instrument cluster. Press and hold the button until the trip meter resets to zero. If your model has a digital display, you may also be able to reset it through the iDrive system by navigating to the trip information menu.


How do you reset the maintenance required light on a Toyota Venza?

Resetting the maintenance LightSwitch the display to the trip meter A when the engine is running.Vehicles with smart key system:Turn the "ENGINE START STOP" switch off.Vehicles without smart key system:Turn the engine switch to the "LOCK" position.Vehicles with smart key system:While pressing the trip meter reset button, set the "ENGINE START STOP" switch to IGNITION ON mode (but do not start the engine because otherwise the reset mode will be canceled).Continue to press and hold the trip meter reset button until the trip meter displays "000000".Vehicles without smart key system:While pressing the trip meter reset button, set the engine switch to "ON" position (but do not start the engine because otherwise the reset mode will be canceled). Continue to press and holdthe trip meter reset button until the trip meter displays "000000".