answersLogoWhite

0

You could try learning celsius like the rest of the world. ;-)

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you change your 99 gmc suburban rearview mirror from celsius to Fahrenheit?

To change your GMC Suburban's rearview mirror from Celsius to Fahrenheit, locate the controls on the mirror that adjust the display settings. Press and hold the buttons until you see the option to switch between Celsius and Fahrenheit, then select Fahrenheit to make the change. If you can't find the controls on the mirror, refer to the owner's manual for specific instructions.


How do you fix 1999 Toyota Avalon rear view mirror?

ok - I give up. What is the problem? In my case, the Fahrenheit reading on my 1997 Toyota Avalon rear view mirror disappeared/ is blank, but the Celsius reading shows, when the button is pressed.


Attach rear view mirror 1999 LeSabre?

Remove the 'button' from the mirror stalk and glue it to the window with 'Loctite Auto Mirror Adhesive'. It will stick almost instantly and you can attach the mirror to it in about 5 minutes.


How do you remove the mirror bolts on a 1997 buick lesabre?

If you need to remove side view mirror: you need to remove door panel and there should be 3 nuts securing mirror to door.


How do you replace the passenger side door mirror 2004 Buick LeSabre?

To replace the passenger side door mirror on a 2004 Buick LeSabre, start by removing the interior door panel. This typically involves taking out screws and gently prying off clips. Once the panel is removed, disconnect the electrical connector for the mirror. Then, unscrew the old mirror from the outside of the door and attach the new mirror, reconnect the electrical connector, and reassemble the door panel.


1998 GMC why does the rear view mirror temp work in cel. and not F. also dimming does not work?

I just had this same thing happen to me, i was quite depressed as i never knew how much i looked at it until it was gone. Out of desperation i held the Temp button in and counted to 15. i looked at the mirror and the Celsius light was blinking so i let go and hit the button again and the Fahrenheit light was blinking. After a second the temp was showing in Fahrenheit again. I hope this works for you. I just had this same thing happen to me, i was quite depressed as i never knew how much i looked at it until it was gone. Out of desperation i held the Temp button in and counted to 15. i looked at the mirror and the Celsius light was blinking so i let go and hit the button again and the Fahrenheit light was blinking. After a second the temp was showing in Fahrenheit again. I hope this works for you.


How is a power passenger mirror on a 1999 grand am replaced?

'95 Buick LeSabre passenger side reaqrview, remotely-controlled mirror has broken from its attachment mounts: how are trhese repaired?


How do you re-glue the rear view mirror on 1997 buick lesabre?

RE GLUE ITANS 2 - Get 'Loctite Auto Mirror Adhesive' from any good auto parts store.


How do you re-glue the rearview mirrow on 1997 buick lesabre?

Unspring the button then glue it to windshield with 'Loctite' Auto Mirror Adhesive,


How do you replace passenger side mirror 1999 buick lesabre?

If only the glass is broken take the car to your local glass repair shop.


How do you change the passenger side view mirror on a 95 LeSabre?

TAKE THE DOOR PANEL OFF AND THEN TAKE OUT THE INNER WINDOW STRUCTURE AND THEN THERE ARE TWO BOLTS HOLDING ON THE MIRROR TAKE THEN OFF GOOD LUCK YOU ARE BETTER OFF HAVING SOMEONE DO IT FOR YOU


How do you remove the button on the inside rearview mirror of a 1997 Buick Lesabre so that you can glue the button back onto the windshield and then attach the mirror?

I just finished replacing a mirror on a 1999 lesabre and they are probably the same. The button is held in place by a spring steel clip that is visable at the square end of the button. It looks like the button and clip are made together but they aren't you place a small pocket screw driver in the center slot of the clip and pry up and out at the same time on the bottom of the button and the button will come out. ...