Hold set button, Push seek for hours, push scan for minutes.
I have a 1994 Sierra...maybe it's the same. Turn the radio power off. Then press the set button. Then press the volume and/or scan buttons to change hour and mins. I don't recall which does hours and which does mins. But...the radio power is definitely off in order to set it. Hope this helps!
Click the link.
Use the set buttons.
you press the buttons for minutes and hours to the desired ones...
To set the clock in a 1995 GMC Sonoma, turn the ignition to the "On" position without starting the engine. Locate the clock adjustment buttons, typically found on the radio or dashboard; press the "Hour" button to set the hour and the "Minute" button to set the minutes. Once the time is set, the clock should automatically save the settings. If your model has a digital display, it may require holding a button until the display blinks to enter adjustment mode.
To change the clock on a 1990 Mercury Cougar, first, locate the clock or radio controls on the dashboard. Turn the ignition key to the "On" position without starting the engine. Then, press and hold the "HR" (hour) button to set the hour, and the "MIN" (minute) button to set the minutes until the correct time is displayed. Release the buttons, and the clock will be set.
You will have to do this from the dashboard. Make sure to have the users manual on hand to make the process easier.
Yes, when performing a system relearn on a 2008 GMC Sierra, it is important to have the parking brake set. This ensures that the vehicle remains stationary during the procedure, which helps prevent any accidental movement and ensures safety. Always refer to the specific service manual for detailed instructions on the relearn process.
Power off raido, press the set button, use the seek and scan buttons.
push your dome override switch 3 times and they will stay on. to turn them off do the same.
To set the clock in a 1990 Buick Riviera, first, turn the ignition to the "On" position without starting the engine. Press and hold the "HR" button to set the hour, and then press the "MIN" button to set the minutes. Release the buttons once the correct time is displayed. Finally, turn off the ignition to save your settings.
This information can be found in the owner's manual. This information can be found in the owner's manual.