turn the raido off and hit the set button, use the seek buttons, up for the hour, down for the min.
Turn the Radio off, Push the set button, use the seek and scan buttons to change the time
you just hold the hour button for a few seconds,same as the minute button. for a few seconds.should move. when it moves,go to the right number on your clock :)
To set the clock on a '94 Chevy Lumina, you typically need to press and hold the "clock" button on the radio until the time display starts blinking. Then, use the "seek" or "tune" buttons to adjust the hours and minutes. Once you have set the correct time, press the "clock" button again to lock it in place.
how do you set the clock on a 2003 chevrolet trailblazer
you need to remove the timing cover and make sure the cam is pointed to 3 o clock and the crank gear has a small 0 on the timing gear that has to be pointed at 12 o clock
turn stereo off,push set,push seek for hour and scan for minutes
The ignition timing on your vehicle is not adjustable. It is set according to driving conditions by the Powertrain Control Module, or PCM. There should be a sticker under the hood with this information.
turn radio off n use radio knobs to set the clock
To change the clock setting on a 1993 Chevy Silverado, first, turn the ignition to the "On" position without starting the engine. Press and hold the "Hour" button to set the hour, and then press the "Minute" button to adjust the minutes. Release both buttons once you have the correct time set, and the clock will retain the new setting. If your model has a different configuration, consult the owner’s manual for specific instructions.
How do youchange the clock on a 2002 zx2 ford escort?
Consult the owners manual.
Let Patrick do it!