press the 'clock' button and follow instructions on the read out
To set the clock in a 2005 Lincoln LS, turn the ignition on without starting the engine. Press and hold the "Clock" button until the hours begin to blink, then use the "Seek" buttons to adjust the hour. Press the "Clock" button again to set the minutes, and use the "Seek" buttons to adjust them as needed. Once set, press the "Clock" button one more time to finalize the settings.
the cam gear mark is set at 6 o' clock and the crank gear mark is set at 12 o'clock.
To set the clock on a 1997 Eurovan, first turn on the vehicle's ignition without starting the engine. Locate the clock adjustment buttons, which are typically found on the dashboard display. Press and hold the "H" button to set the hours and the "M" button to set the minutes. Release the buttons once the correct time is displayed.
Start by pressing "Reset" and then press "Clock". You should now see only the first number highlighted ... which represents the clock hour. Press "Set" for about a second to advance that number forward until it reaches your current hour. Remember, keep pressing "Set" until it shows the correct hour.After you have set the hour, press "Clock" again to advance to the next digit to set the minutes. And so on until all is set correctly. Remember, repeat the same procedure for each, until you have the hour, minute, date, and month set. After you set the last digit, press "Clock" one final time to save it and completely set it. That's it your done!
The limiter is set to like 153 MPH.
wuth key on acc. press CLOCK,SET,CLOCK. time and date will flash, then press SET until the desired setting appears then press clock again. repeat this until you are done.
If by the clock you are talking about the one on the radio it is very simple. 1st> press and hold in the clock button for about 5 seconds 2nd> while still holding in the clock button press the SEEK button for the hours and the SEARCH button for the minutes. 3rd> release the clock button and you are all set
assuming this is the digital clock, you hit the clock button on the dash, followed by the reset button followed by the clock button. at this point, you should be able to hit the clock button to advance numbers, and the reset button to change the numbers you are setting. if its the analog clock, pull on the knob and turn it
Push and hold the rest set. Button
turn off the radio, and then push set, and then use the search/scan buttons to go up in your hours and minutes. :)
the clock is set for time
Press and Hold the display DISP button and then press tune button for hour and minute