The hour and minute button in mine are the tiny buttons under the volume knob. The one on the left is the hour and the one on the right is the minute. Just hold it down for a second and it will change.
Turn the ignition key to the on position. Turn the radio off and press the set button. Set the hour and minutes using the seek buttons.
Push and hold the HR or the MIN buttons
Press and hold the up & down buttons that change the bass, treble, balance, fade, etc.
AnswerTurn the radio off first. Press the set button. Use the scan and seek buttons to set the hour and minute.
turn off the radio, and then push set, and then use the search/scan buttons to go up in your hours and minutes. :)
To set the clock on a 2012 Chevrolet Malibu, first, turn on the vehicle and press the "Menu" button on the audio system. Use the knobs or buttons to navigate to the "Settings" option, then select "Clock." From there, you can adjust the time using the appropriate buttons to set the hour and minutes, and finally, confirm the settings to save the changes.
There are small round buttons under the clock that read "H" and "M".Hold the "H" button in until it changes the hour, do the same with the "M" button to change the minutes.
Mine has a clock symbol, and I just select that. The volume control and associated buttons allow setting hours and minutes. This seems to vary a lot with model and year, which surprises me a little.
Press the set button then within 10 seconds, press the seek and scan buttons to change time.
Use the buttons on the steering wheel . If you go into the settings via these buttons you can sety thge clock
Use the buttons on the steering wheel . If you go into the settings via these buttons you can sety thge clock
Never mind. The min and hr buttons are very small and located in the extreme lower left corner.