Push the set button and within 10 seconds press the seek and scan buttons.
Unplug and reconect the coolant temp sensor.
To set the clock in a 2010 Dodge Caravan, first, turn on the vehicle's ignition. Press and hold the "Hour" button until the hour display starts blinking, then use the "Minute" button to adjust the minutes. Once the correct time is set, press the "Hour" button again to save the changes. The clock should now display the correct time.
To reset the mpg, and timer. You need to press and hold both buttons for about 5 to 6 secs.
S
If it is like my 1991 caravan, turn the key on, hit the "Set" key so "P" appears on the screen, then push the select key, and you are now on time settings, use your dial to dial in the time and hit "set" once finished.
the clock on my 1996 Dodge Intrepid has an H and M on the right top. Use a pen or paperclip after turning the key until the power comes on, but before ignition. H changes hours and M changes minutes.
use a pen and adjust the hours and minutes on the radio by pushing in the switches in the two little holes on the right side of the radiojust next to the right knob
Use the set buttons.
To set the clock on a 1989 Corvette the radio must be turned off. After turning the radio off hit the set button and then hit scan. The time can be set using the arrow buttons.
Usually Caravan tires should be set at around 35 or 36 psi.
My 2000 Dodge Durango , my clock does not have the h or the m for setting the clock! any suggestions on how to set the clock????? Turn radio on, press set, press sel, now seek should change time.