look in the owners manual theres a section on how to replace the battery and reset it if that still don't work it would hav to hav a dealer reset it
How do you program the remote key fob on a 2005 Chevy Malibu maxx
Open the key fob, remove the battery and look and see what size it is.
The key is inside of the key fob. There is a small switch on the back of fob. Push it towards the outside and hold it. While holding the switch, pull on the key ring and your key will slide out.
To replace a 2005 Nissan Murano key fob, first obtain a new key fob that is compatible with your vehicle. Next, insert the key into the ignition and turn it to the "On" position without starting the engine. Within 10 seconds, press any button on the new key fob to program it, then turn the ignition off. Finally, test the new fob to ensure it works properly; if it doesn't, you may need to consult a dealership or a professional locksmith for assistance.
There is not you must use key fob or key to get into trunk
Take it to your Buick dealer is how.
To program a 2005 VW Touareg key fob, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Within 10 seconds, press and hold the "Unlock" button on the key fob while turning the ignition back to "Off." Release the "Unlock" button and press it again within 30 seconds to complete the programming. If successful, the doors will lock and unlock to confirm the new fob is programmed.
To change the key fob battery in a 2005 Infiniti G35, first, use a small flathead screwdriver to gently pry open the key fob along the seam. Remove the old battery, noting the orientation, and replace it with a new CR2025 battery, ensuring the positive side is facing up. Snap the fob back together and test it to make sure it works properly.
what is the reason for not fixing camera in key fob
A programmed RKE fob (remote) or a chipped key is required.
To program a key fob for a 2005 Buick Terraza, sit in the vehicle and close all doors. Insert the key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Repeat this process twice, and on the third turn to "On," press and hold the "Unlock" button on the fob for about 10 seconds, then press the "Lock" button while still holding "Unlock." Release both buttons, and the fob should be programmed.
Free On Board (FOB)