To set the clock in a 2006 Jeep Liberty, turn the ignition key to the "On" position without starting the engine. Press and hold the "Clock" button until the time display starts flashing. Use the "Tune" or "Seek" buttons to adjust the hours and minutes, then press the "Clock" button again to save the setting. Finally, turn off the ignition to complete the process.
The 2005 Jeep Liberty clock can be set by holding in the volume button. With the volume button held in the clock will flash. While the clock is flashing turn the tuning knob to adjust the time.
With an ink pen for hrs and min
The transmission computer has also set a code, have the tcm checked.
transmission codes
you get a pen or something and push the little button on the left had side and press time till it goes up to the right time, the owners manule shows it!
If you are willing to dish out some cash, get a set of JL audios
To set the clock on a 2006 Jeep Commander, turn the ignition to the "On" position without starting the engine. Press the "Menu" button on the radio until you reach the clock settings. Use the seek or tune buttons to adjust the hours and minutes, then press the "Menu" button again to confirm the settings. Finally, turn off the ignition to save the time.
4 bolts on the bottom of the frame. The holes are threaded ready to go.
take all the clips out i believe its like 13 then clip out the grill and u set to go
To set the clock on a 2010 Jeep Liberty radio, first, turn the ignition key to the "On" position without starting the engine. Press the "Menu" button on the radio, then use the tuning knob to scroll to the "Clock" option. Select "Set Clock," then adjust the hours and minutes using the tuning knob, and press "OK" or "Enter" to confirm your settings. Finally, exit the menu to return to normal radio operation.
It means that there is a malfunction with the electronic throttle system. The computer will have set a code. You need to take it in for service.