timing does not need to be set on the 1.3l engine in model year 1999 as it is a distributor less igniton system all timing is done by the ecm
when it brakes
not sure
it is 37
will a 1998 suzuki esteem 1.3 moter fit a 199 geo metro lsi
To change the timing belt on a 2001 Chevy Metro LSi, start by disconnecting the battery and removing any necessary components, such as the air intake and engine cover, to access the timing belt. Next, align the timing marks on the crankshaft and camshaft, then loosen the tensioner and remove the old timing belt. Install the new belt by ensuring the timing marks remain aligned, then tension the belt according to specifications and reassemble the components. Finally, reconnect the battery and start the engine to check for proper operation.
Because it does not have an overdrive gear.
The fuel filter on a 2001 Chevy Metro LSI is located along the vehicle's frame, just beyond the fuel tank. It is positioned inline to prevent contaminants from reaching the engine and allow for easy replacement.
For a 1999 Chevy Metro LSI, it's recommended to use 5W-30 motor oil. This viscosity provides good protection in various temperature ranges. Always ensure to check the owner's manual for specific oil change intervals and any manufacturer recommendations. Using oil that meets the API (American Petroleum Institute) certification is also advised.
The oil capacity of a Chevy Metro LSi, which typically has a 1.3-liter engine, is approximately 4 quarts (or about 3.8 liters) when including the oil filter. It's always a good idea to check the owner's manual for the specific model year for the most accurate information.
You won't find one. It didn't come with a cabin filter.
pcv valve is in the valve cover across from yhe intake plelum
On a 1998 Chevy Metro LSi, the fuse box that holds the accessory fuses is located under the dashboard on the driver's side. You can access it by removing a cover panel to the left of the steering column. This fuse box contains various fuses for accessories and electrical components in the vehicle.