answersLogoWhite

0

Put a wrench on the nut then pull hard cw that's should loosen the tensioner so the belt will come off. Let go then loosen the nut ccw

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Where is the tensioner pulley on a 2003 Ford explorer?

near the belt


Will a headlight from a 1992 Ford Bronco fit in a 1991 Bronco?

no it will not


Where is the fuel pump located on a 1992 ford bronco?

On a 1992 Ford Bronco : The electric fuel pump is INSIDE the fuel tank


How do you tighten the serpentine belt on a 1993 Ford Escort GT?

Install a new tensioner pulley. If a serpentine belt is loose then the spring in the tensioner pulley is probably weak or the tensioner pulley is hanging up on something. Have fun! Chris


Where is the tensioner pulley on the ford zx2?

just above the ac clutch


How do you change the belt tensioner pulley on a 1998 ford contour?

what engine??


How do you change the tensioner pulley in 2005 Ford Freestar?

To change the tensioner pulley on a 2005 Ford Freestar, first, disconnect the battery to ensure safety. Then, locate the tensioner pulley, typically found near the front of the engine. Use a ratchet and socket to relieve tension on the serpentine belt by turning the tensioner arm, then slide the belt off the pulley. Remove the old tensioner pulley by unbolting it, and install the new pulley by reversing the process, ensuring the belt is properly routed before reapplying tension.


How do you install fan belt on 1997 ford ranger 3.0 v6?

Loosen the tensioner pulley. Put the fan belt around the pulleys. Pry the tensioner pulley to the right until the belt is tight. Tighten the tensioner pulley nut.


How do you change the idler pulley on a 1994 Ford Bronco?

To change the idler pulley on a 1994 Ford Bronco, first, ensure the engine is off and cool, then disconnect the negative battery cable. Use a socket wrench to relieve tension on the serpentine belt by rotating the tensioner pulley, and remove the belt from the idler pulley. Unbolt the old idler pulley using the appropriate socket size, then install the new pulley and reattach the serpentine belt following the routing diagram. Finally, reconnect the battery cable and start the engine to ensure everything is functioning properly.


How do you install an idler tensioner pulley on a 1999 F350?

The idler tensioner pulley on your 1999 Ford F3 50 pickup truck is held in place with a single retaining bolt. The retaining bolt will go through the middle of the pulley. Tighten the retaining bolt to install the tensioner pulley.


How do you get the tension pulley lose to put slack in the belt on a 2001 Ford Focus?

Pry up on the tensioner pulley.


Where is the cooling system diagram for a 1992 Ford Bronco?

You can find a 1992 Ford Bronco cooling system diagram at most Ford dealerships. The diagram will be in Ford service manuals at your local library.