0
What else can I help you with?
Is there a trunk release or certain way you can open your trunk or get into it without a key on a 1993 Chevrolet Cavalier?
The key number used to be the same as on the glove box lock and you can take the glove box lock apart and find out the key number OR you can take the rear seat out and with a couple of loooong extensions and a ratchet and socket, remove the striker in the trunk. Lots of luck
How do you replace the lock on the trunk?
how do i replace a trunk lock with another lock that has a key
How do you take out the backseat so you can access the trunk from inside the car Something in the trunk is blocking the trunk lock mechanism Thanks?
Need to know what the vehicle is.
How do you take a house front door lock apart?
)( ===
How can you open the trunk of a 1989 Maxima if the lock is jammed and the push rod will not work either from inside?
TO GET INTO THE TRUNK OF A 89 MAXIMA YOU MUST TAKE THE BACK SEAT OUT AND CLIMB IN AN MANUALLY RELEASE THE LOCK.
How do you open the trunk?
With a key. Take the back seat out and reach through and either take the bolts out that hold the lock in or some newer cars have an emergency release in the trunk so that you can not be car jacked and put in the trunk.
2006 Impala how to get in trunk manually remote does not open?
Doesn't it have a key lock also?, if not you will have to take the back seat out and crawl through and open it from the inside, there should be a handle on the lock on the inside of the trunk that you can pull and it will open.
How do you take a lock out of a trunk lid of a 1972 Chevelle?
It should just have a slide clip that holds it in.
How do you replace 1996 maxima trunk lock?
To replace the trunk lock on a 1996 Nissan Maxima, start by removing the trunk lining to access the lock mechanism. Disconnect the wiring harness and unscrew the lock assembly from the trunk lid. Replace it with the new lock, reattach the wiring harness, and secure it with screws. Finally, replace the trunk lining to complete the installation.
How do you lock trunk of E320 Mercedes?
To lock the trunk of a Mercedes E320, you can simply press the lock button on your key fob after closing the trunk. Alternatively, you can lock the vehicle using the central locking button inside the car or by turning the key in the driver's door lock. Ensure that the trunk is fully closed for it to lock properly. If you have the keyless entry system, just walking away from the vehicle should also lock the trunk automatically.
How do you open trunk when you lost the key to a 1974 Pontiac catalina?
There are a few options. If the trunk and door locks take the same key, take one of the door locks out and take it to a good locksmith. They can cut you a new one. You can also drill out the lock, using a progressively larger bit until the lock bar can be taken out. You can pry, rip and pull the lock out....at the same time probably destroying the trunk lid. The only other option I can tell you, is to remove the back seat. If you're lucky, there will be enough room for you to crawl into the trunk area enough to reach the lock mechanism so that you can remove it and open the trunk.
Is there any way you can lock a 1996 ford crown Victoria's trunk from the inside of the car?
Yes, you can lock a 1996 Ford Crown Victoria's trunk from inside the car by using the trunk release mechanism. If the trunk release lever is functional, pulling it will unlock the trunk, and then you can manually lock it using the key or the trunk lock itself. Additionally, ensure that the trunk's latch is functioning properly to keep it secured. However, there is no electronic way to lock the trunk from the inside; it must be done manually.
