Checkout the See "Related Questions" below for a discussion about getting dashboards out of Taurus - Sables. Note: If you're doing it to replace the heater core, be sure to review those questions as a mechanic has documented a method to replace the core without taking the dash out! Otherwise... Good luck, but I think it's easier than my 1987 wagon was - still a tough chore.
I was looking at the 2001 Mercury Sable Owner Guide and it mentions a TRACTION CONTROL on / off switch located to the right of the instrument cluster
To remove the dashboard from a 1995 Mercury Sable, start by disconnecting the battery to ensure safety. Next, remove any screws and bolts securing the dashboard, which are typically located in the glove compartment, around the instrument cluster, and under the dash. Carefully pry off any trim pieces and disconnect electrical connectors for the gauges and controls. Finally, gently pull the dashboard away from the vehicle, ensuring all connections are detached.
The O/D OFF warning light in the bottom left of your tachometer on your 1999 Mercury Sable means that the ( OVERDRIVE IS OFF ) * that's the " top gear " of your automatic transmission
take off the metal covers unscrew the screws pull it out from the top
On a 1996 Mercury Sable : The fuel pump shut off switch ( inertia switch ) is in the trunk , behind the trunk liner on the passenger side ( there is an access hole )
On a 1999 Mercury Sable wagon : The fuel pump shut off switch ( inertia switch ) is in the cargo area , behind the service panel on the passenger side
Yes , the fuel pump shut off ( inertia ) switch is behind the access panel on the right side of the cargo area in your 2002 Mercury Sable wagon
You do not. This is illegal and very dangrous.
yes
Press button
Could be a bad inertia switch.
Front wheels off the ground (tow truck or dolly) parking brake off