It's a big job and you'll need a service manual to find all the right disconnects and fasteners.
how to take off a camshaft puller from a 1999 Hyundai Tiburon
A 2001 HYUNDAI TIBURON WILL TAKE APPROX. 3.7L
Im not sure how to! I was wondering what it governs out at? 137 MPH
you must take it to a dealer. Just had to do mine. Cost $44.50
10w30
no tiburon has a dipstick for the tranny fluid. you have to take off the fill plug and check with your finger.
5w20...use synthetic
It only takes 4 quarts of oil
hammer PS use the right to
$800 give or take
it follows the radiator pump on the right side of the engine you can see it better if you take off the cover.
To change the body control module (BCM) in a 2003 Hyundai Tiburon, first disconnect the negative battery terminal to ensure safety. Locate the BCM, which is typically found under the dashboard or near the fuse box. Remove the mounting screws and connectors to take out the old module. Install the new BCM by connecting the wiring harness and securing it with screws, then reconnect the battery and test the system for proper functioning.