First take the wheel and caliper off. Second, take a large wheel puller and crank down on that puppy. Use a brass hammer and tap around the edge of the rotor it should pop off. Rust is generally the culprit.
take it to a qualified dodge mechanic
To change the front rotors on a 1999 4x4 Dodge Ram 2500, start by safely lifting the vehicle and removing the front wheels. Next, remove the caliper bolts to take off the brake caliper and support it without stressing the brake line. Then, remove the caliper bracket bolts and slide off the old rotor; replace it with the new rotor, reassemble the caliper and bracket, and finally, reattach the wheels. Be sure to pump the brake pedal before driving to ensure proper brake function.
A Dodge 2500 has numerous bolts that take all sizes of wrenches.
5w20
Where is the thermostat on a 1999 dodge 2500 where the top radiator hose meets the engine. You will have to remove 3 small bolts. take about 3 minutes to change it.
It will fit in any 2500 or 3500 Ram. If it is a different version of the Cummins it will take a lot of modifications to make it work.
7 quarts
Removing Front & Rear Rotors Well Guys... I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT. I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off... The way I removed the Front & Rear Rotors was ... 1. I put lots of PB Blaster in the back and the front of the rotors to be removed. 2. I put plenty of tension with the 3 Jaw Puller... 3. I hit the back of the rotor with the sledge hammer... And it came right off... Hope this helps...
take off a retaining nut?
how do you change a thermostat on a 2004 dodge ram 2500 series
take brakes off and calipers off, next rotors should come off easily.
Pull the tires off and take the brake calipers off and the rotors will pull off.