0
What else can I help you with?
How do you replace the steering knuckle on a Chevy colbalt?
Replacing a steering knuckle on a Chevy Colbalt is easy. All you have to is take the steering wheel off and replace the old one.
How do you remove the steering wheel on a 1993 Chevy Sliverado?
take off center cover, remove large nut then use wheel puller to remove steering wheel
How do you remove the steering wheel on a 1998 Chevy lumina?
there should be a couple of bolts on the back side of your steering wheel that removes the front face and after you take that off there will be a large nut that will take off the rest of the steering wheel, but remember to disconnect the airbag before you remove the steering wheel cause you could set it off.
How do you pull the steering wheel off of a 1976 Chevy Nova?
pull the center pad off the wheel and then take the nut off that holds the wheel on and then get a steering wheel puller and hook it up and pull the wheel off the splines.
Do you have to take the steering wheel off to change a ignition lock tumbler on a 96 Chevy Tahoe?
yes
How do you lock the steering wheel on a 1997 Chevy Malibu?
The wheel should lock when you take the key out of the ignition. If it doesn't, there's something wrong.
How do you remove steering column 1992 Chevy Caprice?
Remove two screws 10mm from back of steering wheel,take the air bag part off the steering wheel after removing the two screws,then there should be one big bolt that you haft to remove . The steering wheel will come right off..
Where can you find an exploded view of an 1988 Chevy van steering column?
I took the steering wheel off and I am wondering where I go next, do I take the four big bolts that hold the steering col. to the bottom of dash off, or what , I sure could use some sound advise, I am mechanically inclined but I have never been inside one of these. my problem is the whole steering wheel moves around and I am trying to get to the bolts that hold it together in there somewhere........ any advice sure would be appreciated . thanks gents.....Jesse Vasquez @ cierrajane @ windstream.net Van is a 1988 Chevy van G20, with a 350 enjine......
Where is the horn conneter in a Chevy avalanche?
In a Chevy Avalanche, the horn connector is typically located behind the steering wheel. To access it, you may need to remove the airbag and the steering wheel cover. The connector itself is usually a plug that connects the horn wire to the steering wheel assembly. Always ensure you take proper safety precautions when working with airbag components.
How many bolt are on chevrolet's 1988 1500 steering wheel?
When you take the horn button off there is 1 big nut in the center of the steering wheel. Remove the nut and the safety snap ring. Then install a puller onto the steering wheel and pull it off. It will not just lift off with your hands.
How do I Pull steering wheel 68 Chevy truck?
you have to take the horn cover off, unscrew the nut, and either use a steering wheel puller or your hands. You can place both your hands on the underside on both sides and hit upwards.
How do you remove the steering wheel on a 1979 Chevy Silverado stepside pick up?
well dude u take the horn cover off and taake all the guts out and then u should see holes in the stering wheel and get a steering wheel puller and pull it off
